Raymarine 9M Backbone Cable f/SeaTalk ng
$74.99
In stock
SKU
JMS138786
Raymarine 9M Backbone Cable f/SeaTalk ng is available to buy in increments of 1
Raymarine 9M Backbone Cable f/SeaTalk ng
Raymarine Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat.
Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed.
Two backbone cable lengths can be joined together by part A06030, a backbone extender.
Load Equivalence # (LEN) = NONE
Category: Marine Navigation & Equipment | Network Accessories
Manufacturer Part Number: A06068
In a SeaTalkng installation, a backbone cable runs through the length of the boat.
Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed.
Two backbone cable lengths can be joined together by part A06030, a backbone extender.
Load Equivalence # (LEN) = NONE
Category: Marine Navigation & Equipment | Network Accessories
Manufacturer Part Number: A06068
UPC Code | 091975004841 |
---|---|
Manufacturer Part Number | A06068 |
Manufacturer | Raymarine |
Write Your Own Review