Pettit Splash Zone Epoxy Part A + B PET-A788-2G

A 2 component, 100% solids (no volatile solvents) epoxy-polyamide mastic. Designed to provide protection against corrosion of metals and erosion and deterioration of concrete and wood at, above and below the waterline in splash zones. Also used as a coating repair of boat hulls and buoys, on bridge abutments, and on any surface subject to erosion and corrosion in salt or fresh water. Used for patching and grouting applications that are not submerged, and on surfaces which subsequently are buried in soil. A-788 can be mixed and applied underwater and will cure underwater as well as in air. Adheres to any clean sound surface, either wet or dry, including aluminum, galvanized steel, steel, concrete, wood, fiberglass and existing coatings. Cures to an extremely hard coating which is abrasion and impact resistant, and which will substantially retard further erosion or corrosion. Not for use in potable water.
Size Gallon Kit