Pettit Paint Flexpoxy 450 Ml A/B Cart. Set PET-7076TBS

Can be used above and below the waterline on fiberglass (including blister repair), wood, steel and aluminum hulls and topside sections with spectacular results. After curing, Flexbond retains a very high elasticity (+ or - 40% of volume) overcoming the most negative feature of other epoxies brittleness. Can be used at temperatures ranging from 40-90Á F. After full cure occurs the Flexbond epoxy can be filed, planed, sawed, drilled in, nailed in, screwed in and sanded down. Will not sag, run or shrink during or after application. Fully water and damp resistant in a layer of 2 mils. Can be tinted with all types of oil based, polyurethane or epoxy paints, even wood stains. It will not blush through any type of paint so no primer is required. 100% pure epoxy and is solvent (0 VOCÍs) and filler free.
A/B Tubes, 450 ml.